Panasonic NV-GS 8 EGE Operating Instructions Manual page 59

15EGE-ENG.book 59 ページ ２００４年２月９日 月曜日 午前１１時１０分
ª Memory Stop Function
The Memory Stop Function is useful for the
following operations.
Rewinding or fast-forwarding a tape to a
desired position
1
Set [DISPLAY] >> [C.DISPLAY] >>
[MEMORY].
2
Reset the Tape Counter to zero at the tape
position from which you want to play it
back later. ( , )
-7- -15-
3
Start playback or recording.
4
After playback or recording has finished:
Set the Movie Camera to Tape Playback
Mode.
5
Rewind the tape.
≥The tape automatically stops approximately
at the position where the counter was set to
zero.
Stopping editing automatically during audio
dubbing
1
Set [DISPLAY] >> [C.DISPLAY] >>
[MEMORY].
2
Reset the Tape Counter to zero at the
position where you want to stop editing.
3
Play back the still picture where you want to
start audio dubbing.
4
Start audio dubbing. (
≥Audio dubbing automatically stops at the
position where the counter was set to zero.
Others
)
-40-
-59-