Copying On An S-Vhs (Or A Vhs) Cassette; Using The Dv Cable For Recording - Panasonic NV-GS 8 EGE Operating Instructions Manual

15EGE-ENG.book 41 ページ ２００４年２月９日 月曜日 午前１１時１０分
To Play Back the Sound Recorded by 12bit
Audio Dubbing
Set [TAPE PLAYBACK MENU] >> [PLAYBACK]
>> [12bit AUDIO] >> [ST2] or [MIX].
ST1: It plays back only the original sound.
ST2: It plays back only the sound added by Audio
Dubbing.
MIX: It plays back both the original sound and the
sound added by Audio Dubbing
simultaneously.
To Dub Audio While Listening to a
Pre-recorded Sound
When pausing the audio dubbing, set the
[12bit AUDIO] on the [PLAYBACK] Sub-Menu to
[ST2] and you can check the pre-recorded sound.
When a microphone is used for audio dubbing,
use headphones to listen to the pre-recorded
sound while dubbing the audio. (When using
headphones, set [AV JACK] on the [INITIAL]
Sub-Menu to [OUT/PHONES].)
≥For other notes concerning this item, see
Copying on an S-VHS (or a VHS)
Cassette
(Dubbing)
After connecting the Movie Camera and the
VCR as illustrated, start the following
procedures.
[S-VIDEO IN]
2
1 AV Cable
2 S-Video Cable (not supplied)
≥Be sure to press the [OSD] Button (
Remote Controller (supplied with NV-GS11 and
NV-GS15) prior to copying so that no
indications are visible. Otherwise, the displayed
tape counter and function indications are also
copied.
Editing Mode
Movie Camera:
1
VCR:
2
Movie Camera:
3
VCR:
4
5
Movie Camera:
6

Using the DV Cable for Recording

(Digital Dubbing)
By connecting this Movie Camera to other digital
video equipment that has a DV Input/Output
Terminal with a DV Cable VW-CD1E (optional)
.
-52-
1, dubbing can be done in the digital format.
≥Only the NV-GS15 can be used as a Recorder.
Player/Recorder:
1
[VIDEO IN]
[AUDIO IN]
1
A/V OUT
PHONES/ MIC
REMOTE
) on the
-7-
-41-
Insert the recorded Cassette.
Insert an unrecorded Cassette with an
erasure prevention tab.
≥If various setups (such as external input, tape
speed, etc.) are required, please refer to the
operating instructions of your VCR.
Press the [1] Button to start playback.
Start recording.
Press the Pause or Stop Button to stop
recording.
Press the [∫] Button to stop playback.
1
Insert the Cassette and set to Tape
Playback Mode.