1. Manuals
  2. Brands
  3. Snapper Manuals
  4. Lawn Mower
  5. Easy Line ESPV21
  6. Safety instructions & operator's manual

Snapper ESPV21, ESPV21S Safety Instructions & Operator's Manual

European 21” ‘easy line’ walk behind mowers
Hide thumbs Also See for ESPV21, ESPV21S:
Table of Contents

Advertisement

Quick Links

Download this manual
EUROPEAN MODEL
MODEL DESIGNATION
SELF-PROPELLED
E – European Model
S – 'Easy Line'
Thank you for buying a SNAPPER Product! Before operating your Walk Behind, read this manual carefully and
pay particular attention to the "IMPORTANT SAFETY INSTRUCTIONS" on Pages 2 - 4. Remember that all power
equipment can be dangerous if used improperly. Also keep in mind that SAFETY requires careful use in
accordance with the operating instructions and common sense.
NOTE: Specifications are correct at time of printing and are subject to change without notice.
* Actual sustained equipment horsepower will likely be lower due to operating limitations and environmental factors.
COPYRIGHT © 2006
SNAPPER – A DIVISION OF SIMPLICITY MFG., INC.
ALL RIGHTS RESERVED
Safety Instructions & Operator's Manual for
MODEL NUMBER EXPLANATION
E
S
P – Self Propelled Model
21" 'EASY LINE'
WALK BEHIND
P
V
21
V – Variable Speed
MANUAL No. 7100513 (Rev. 1, 4/4/2006)
EUROPEAN
MOWERS
MODELS
ESPV21
ESPV21S
S
OPTION DESIGNATION
CUTTING WIDTH
VARIABLE SPEED
21 – 21" Cutting Width
S – Swivel Front Wheels
TP 100-5129-01-WB-N

Advertisement

Table of Contents
loading

Related Manuals for Snapper ESPV21, ESPV21S

Summary of Contents for Snapper ESPV21, ESPV21S

  • Page 1 P – Self Propelled Model S – ‘Easy Line’ Thank you for buying a SNAPPER Product! Before operating your Walk Behind, read this manual carefully and pay particular attention to the “IMPORTANT SAFETY INSTRUCTIONS” on Pages 2 - 4. Remember that all power equipment can be dangerous if used improperly.

  • Page 2: Important Safety Instructions

    If you have any questions pertaining to your machine which your dealer cannot answer to your satisfaction, call or write the Customer Service Department at SNAPPER, McDonough, Georgia 30253. Phone: (1-800-935-2967).
  • Page 3 IMPORTANT SAFETY INSTRUCTIONS SAFE HANDLING OF GASOLINE (Continued From Previous Page) 3. DO NOT remove fuel cap or add fuel with the engine running. Allow the engine to cool before refueling. 4. DO NOT refuel the machine indoors. 5. DO NOT store the machine or fuel container inside where there is an open flame, spark or pilot light such as on a water heater or other appliances.
  • Page 4 10. DO NOT test for spark by grounding spark plug next to spark plug hole; spark plug could ignite gas exiting engine. 11. Have machine serviced by an authorized SNAPPER dealer at least once a year and have the dealer install any new safety devices.

  • Page 5: Table Of Contents

    TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS... 2 - 4 TABLE OF CONTENTS...5 SECTION 1 - FAMILIARIZATION...6 SECTION 2 - OPERATING INSTRUCTIONS... 7-10 Pre-start Checklist...7 Starting & Stopping Engine & Blades ...7 Propelling Mower ...8 Handle Height Adjustment ...8 Cutting Height Adjustment...9 Recycling Operation...9 Installation of Side Discharge Deflector ...10 Installation of Grass Bag Adapter ...10...

  • Page 6: Section 1 - Familiarization

    The nomenclature drawing above, Figure 1.1, shows WALK BEHIND the essential parts of the SNAPPER ‘EASY LINE’ WALK BEHIND MOWERS. It is recommended that all operators of the mower become thoroughly familiar with the controls, parts and operation of the mower before operating.

  • Page 7: Section 2 - Operating Instructions

    Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECK LIST Make the following checks and perform the service required before each start-up. 2.1.1. Check guards, deflectors, grass bag, adapter and covers to make sure all are in place and securely tightened. 2.1.2.

  • Page 8: Propelling Mower

    Section 2 - OPERATING INSTRUCTIONS 2.2 STARTING & OPERATION 2.2.2. PROPELLING MOWER 1. Start engine. Refer to Section “Starting & Operation – Engine & Blade”. 2. Move ground speed control to the desired speed position. See Figure 2.5. 3. Squeeze wheel drive control against handle to engage wheel drive and propel mower forward.

  • Page 9: Cutting Height Adjustment

    Section 2 - OPERATING INSTRUCTIONS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 10: Installation Of Side Discharge Deflector

    Inspect frequently components immediately. secured. Install Grass Catcher bags used on SNAPPER products are made deterioration and wear during normal usage. Check condition of bag before each use. replace worn or damaged catcher bags with only bags recommended by SNAPPER.

  • Page 11: Section 3 - Maintenance Instructions

    Section 3 – MAINTENANCE 3.1 INTRODUCTION To retain the quality of the mower, use genuine SNAPPER replacement parts only. Contact a local SNAPPER dealer for parts and service assistance. For the correct part or information for a particular mower, always mention model and serial number.

  • Page 12: Wheel Drive Components

    Section 3 – MAINTENANCE WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 13: Section 4 - Adjustments And Repair

    Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 14: Wheel Drive Control Adjustment

    Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 15: Ground Speed Control Adjustment

    Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 16: Belt Service

    Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 17: Rear Cover Removal & Installation

    Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 18: Troubleshooting

    3. Replace air lifts. Tighten to proper torque. 4. Replace belt. 1. Clean debris. 2. Adjust transmission clutch cable. 3. Replace drive belt. 4. Contact authorized SNAPPER dealer. 1. Adjust transmission clutch cable. 2. Contact authorized SNAPPER dealer. 1. Clean debris. 2. Adjust ground speed control.

  • Page 19: Service Schedule

    ITEM SERVICE PERFORMED Check Oil Level Engine Oil Initial Oil Change Periodic Oil Change Air Pre-Cleaner Clean Sponge Element Air Cleaner Clean or Replace Replace Spark Plug Engine Cooling Clean Shroud & Fins System Drive Belt Check For Wear And Tension Mower Blade Check For Wear, Damage...

  • Page 20: Decal Identification

    SAFETY ALERT SYMBOL. OBSERVE AND FOLLOW ALL SAFETY INSTRUCTIONS. READ, UNDERSTAND AND FOLLOW INSTRUCTIONS AND WARNINGS IN OPERATOR’S MANUALS, AND ON THE MOWER, ENGINE AND ATTACHMENTS BEFORE OPERATING. (1) WARNING INSTRUCTIONS. (2) WARNING: Do Not operate without entire Grass Catcher or Guard in place. (3) PRIME (on engine): Use for initial engine starting.

  • Page 21: Decal Identification

    OPERATOR PRESENCE CONTROL (OPC): Arrow points to the OPC bail. When bail is rotated rearward, the engine may be started and will run as indicated by the engine with rotating arrow. With the engine running, the blade is rotating as indicated by the cut grass symbol.

  • Page 22: Warranty

    For two (2) years from purchase date for the original purchaser's residential, non-commercial use, SNAPPER, through any authorized SNAPPER dealer will replace, free of charge (except for taxes where applicable), any part or parts found upon examination by the factory at McDonough, Georgia, to be defective in material or workmanship or both.
  • Page 23 NOTES...

  • Page 24: Walk Behind Mowers

    WALK BEHIND MOWERS Snapper products are built using engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contain very important emissions information and critical safety warnings. Read, Understand, and Follow all warnings and instructions in this manual, the engine manual, and on the machine, engine and attachments.

Table of Contents