Shutdown - BenQ PB7200 User Manual

Shutdown

1. Press and hold POWER and a warning message will appear. To turn off the
projector, press and hold POWER again.
2. The fan will continue to run for approximately 90 seconds.
3. Turn off the main power switch.
4. Disconnect the power cord from the wall socket.
Caution
Please do not unplug the power cord before POWER is shut down or dur-
ing the 90-second cooling process.
If the projector is not properly shut down, to protect the lamp, the sys-
tem will detect this and cool the lamp for 90 seconds automatically
before turning on again.
BenQ PB7200/ PB7220/ PB7100 User's Manual
Projector
Remote Control
Operation
21