Specifications - Snapper ERZT20441BVE2 Operator's Manual

NOTE: Specifications are correct at time of printing and are subject to change without notice.
* Actual sustained equipment horsepower will likely be lower due to operating limitations and environmental factors.
ENGINE:
20 HP* Briggs & Stratton
Make Briggs & Stratton
Model 20 hp ELS
Horsepower 20 @ 2700 rpm
Displacement 40.0 Cu. in (656 cc)
Electrical System 12 Volt, 9 amp. Alternator, Battery: 230 CCA
Oil Capacity 64 Oz. (1.9 L) w/ Filter
CHASSIS:
Fuel Tank Capacity: 3.0 Gallons (11.4 L)
Rear Wheels Tire Size: 18 x 8.50-8
Inflation Pressure: 15 psi (1,03 bar)
Front Wheels Tire Size: 11 x 4.00-5
Inflation Pressure: 25 psi (1,72 bar)
CE COMPLIANCE SPECIFICATIONS:
Model
RPM's (Governed)
Kilowatts (kW) (@ Governed RPM's)
Unit Mass (kg)
Sound Power (LWA) (dBA)
Sound Pressure (LPA) (dBA)
Vibration (Hand) (m/s2)
Vibration (Body) (m/s2)
ERZT20441BVE2 (Snapper) EJAV20441BVE2 (Simplicity)
2700
11.29
276
100
88
9.8
0.7
TRANSMISSIONS:
Hydro-Gear
ZA-DHBB-2D5A-2DCX (LH)
ZA-AHBB-2D5A-2DCX (RH)
Type EZT
Hydraulic Fluid Sealed Unit
Speeds Forward: 0-6.2 MPH (0-9.98 km/h)
@ Specified rpm Reverse: 0-3 MPH (0-4.83 km/h)
Continuous Torque 115 ft. lbs. (155 N.m.)
Output
Maximum Weight 340 lbs. (154 Kg) per Axle
on Axle
DIMENSIONS:
Overall Length 72" (182,9 cm)
Overall Width 55" (139,7 cm)
Height 38" (96,5 cm)
Weight (apx.)
Snapper 608 lbs. (276 kg)
Simplicity 624 lbs. (283 kg)
2700
11.29
283
100
88
9.8
0.7
33

Specifications