Sagem MY X-5 User Manual page 68

251206690_MYX-5p_en
Troubleshooting
P
ROBLEM
Backlight does not work
In WAP context:
SERVER NOT ANSWERING message
Logon to home page impossible
Operator name does not appear on
screen
How do I (un)lock the keypad?
How do I switch to silent mode?
How do I activate zoom?
How do I remove the envelop that
appears on the screen?
How do I lift the receiver that appears
on the screen?
68
21/10/02 14:00
- S
ITUATION
Go into the "Settings" menu, select the "Energy saving" menu and acti-
vate backlight
Switch off and then switch telephone back on.
In the WAP menu, Clear the cache.
Go into the "Settings" menu, select "Networks", then "Selection". Wait
until the operator appears, select it and accept.
0
0
Hit0
Hold0
Can be activated only in SMS and WAP screens; hold down0
This envelop means that you have written or answer phone.
To remove it, all you need to do is enter the "Messages" menu to read
your messages. The envelop is then deleted.
In the case of a voice message, contact your answer phonebox and let it
guide you.
This receiver means that you have received answer phone in your mes-
sage box. To remove it, call your answer phone.
Page 68
ACTIONS
key,then the right programmable key
key down unless ring tone sounds,when a short touch is enough.
4
(OK).
0
key.