Setting A Programme; Interrupting A Programme And Changing The Options; Cancelling A Running Programme - Zanussi ZWF71243WE User Manual

Measure out the fabric
conditioner.

SETTING A PROGRAMME

1. Turn the programme knob to switch the
appliance on and set the programme:
• The indicator of the button
• The display shows the programme duration.
2. If necessary, change the temperature and the
spin speed or add available options. When you
activate an option, the indicator of the set
option comes on.
If you set something incorrect, the
display shows the message
Autosense function
At the start of the programme, the display shows
the programme duration for the maximum load
capacity. During the washing phase the programme
duration is automatically calculated and can be
greatly reduced if the laundry load is lower than the
maximum load capacity. When the appliance is
calculating the real programme duration the display
is alternatively showing the " loading " animation
and the max load capacity time duration .The
new time duration is appearing when calculation is
finished. (e.g. Cotton 30° programme , maximum
load capacity 7 kg , the default programme duration
exceeds 2 hours, in case of actual load 2 kg, the
program duration will be reduced to only 1 hour 20
min).
STARTING A PROGRAMME WITHOUT THE
DELAY START
Press the button .
• The indicator of the button
flash and stays on.
• The programme starts, the door locks, the
indicator
• The programme time decreases with steps
of one minute.
Carefully close the deter-
gent drawer.
flashes.
stops to
is on.
The drain pump can operate for a
short time at the beginning of the
washing cycle.
STARTING A PROGRAMME WITH THE DELAY
START OPTION
1. Press the button Delay Start
again until the display shows the delay you
want to set. The delay start indicator comes on.
2. Press the button Start/Pause
• The door is locked and the indicator
on.
• The appliance starts the countdown.
• When the countdown is completed, the
programme starts automatically.
You can cancel or change the set of
the Delay Start
press the button Start/Pause
After pressing the button Start/Pause
.
Pause option.
To cancel the Delay Start
a. Press the button Start/Pause
the appliance to pause. The indicator of
button
b. Press the button Delay Start
display shows
Press the Start/Pause button
start the programme immediately.
INTERRUPTING A PROGRAMME AND
CHANGING THE OPTIONS
You can change only some options before the
programme carries them out.
1. Press the Start/Pause
the running programme.
The related indicator flashes.
2. Change the options.
3. Press the Start/Pause
The programme continues.

CANCELLING A RUNNING PROGRAMME

1. Turn the programme knob to position
cancel the programme and to deactivate the
appliance.
option before you
you can only cancel the Start/
option:
flashes.
.
button to interrupt
button again.
again and
:
is
.
to set
until the
again to
to
13