Figure 4.14 Access Termination (Idle Mode) - Samsung Mobile WiMAX Outdoor RAS SPI-2331 System Description

Access Termination (Idle Mode)
The following is the procedure that the access is terminated because the power of the Idle
Mode MS is turned off.
MS
1) RNG-REQ
(Location Update Request, Paging Controller ID)
4) RNG-RSP
(Location Update Response)
Classification
(1)~(5)
(6)
(7)~(8)
© SAMSUNG Electronics Co., Ltd.
Mobile WiMAX Outdoor RAS SPI-2331 System Description/Ed.02
RAS
2) LU Request
3) LU Response
5) LU Confirm

Figure 4.14 Access Termination (Idle Mode)

If the power of the Idle Mode MS is turned off, the MS transmits the RNG-REQ
message including the Power Down Indicator to the RAS, and the RAS notifies
the ACR of this. The ACR deletes the information of the MS.
ACR release the MIP related information with HA.
Diameter is applied to AAA protocol, S-ACR performs the session termination
procedure.
ACR AAA
6) MIP release
7) STR
8) STA
Description
HA
4-21