Charging The Battery Pack - Samsung SC-MS10 Owner's Instruction Book

00934C SC-MS10 USA~037
ENGLISH
How to Use the Battery Pack

Charging the Battery Pack

1. Turn off the Miniket Photo for a while.
2. Attach the Battery Pack to the Miniket Photo.
3. Open the Connector Cover of the set.
4. Connect the AC Power Adapter with the Miniket Photo.
◆
You can detach the AC adapter by pressing the buttons on the sides of
the adapter cable plug while pulling it out.
5. Insert the AC Power Adapter into the outlet.
[ Notes ]
✤
You can charge the Battery Pack while using the Miniket Photo, but it t takes a
relatively longer time.
✤
You may use the Miniket Photo powered by the AC Power Adapter indoors where
available.
✤
You may charge your Miniket Photo by connecting it to a PC with the USB cable.
[ Warning ]
✤
It is recommended you fully charge the Battery Pack before use.
✤
You should only charge the battery in an environment between 32°F (0°C) and 140°F (40°C).
✤
Ambient temperature may affect charging the Battery Pack; too low temperature may result in
longer charge time / incomplete charging.
Adequate room temperature for charging is 10°C ~ 30°C.
✤
Before connecting the cable, make sure that you don't have any foreign substances between
connectors.
It is recommended to fully charge the Battery Pack before use.
24 24
9/30/05 10:55 AM Page 24
Charging directly to the Miniket Photo
5
4