Torque to 40-45 ft. lbs. Apply grease to entire length of chain (Lithium No. 2). Must be parallel to blower housing within 1/8" when assembled. Grease when assembled. Sprocket must be in-line with driven sprocket within .06" TP 400-3540-00-AT-SMA 986022...
Page 3
171242 1960244 Footnotes: The above parts group applies to the following Mfg. Nos.: 1694295 Single Stage Snowthrower, 42” TP 400-3540-00-AT-SMA DESCRIPTION SETSCREW, 5/16-18 x 1/2, G8 PULLEY CAPSCREW, Hex Head Whizlock, 3/8-16 x 1 CAPSCREW, Hex Head 5/16-18 x 1-3/4...
Page 5
1717591 1916950 1717136 Footnotes: * Not a service part. The above parts group applies to the following Mfg. Nos.: 1694295 Single Stage Snowthrower, 42” TP 400-3540-00-AT-SMA DESCRIPTION BODY & FRAME ASSEMBLY LOCKWASHER NUT, Hex, 5/16-18 LOCKWASHER, 3/8 PIN, Safety PIN, Clevis...
Hardware Identification & Torque Specifications Common Hardware Types Hex Head Capscrew Carriage Bolt Standard Hardware Sizing When a washer or nut is identified as 1/2”, this is the Nominal size , meaning the inside diameter is 1/2 inch; if a second number is present it represent the threads per inch When bolt or capscrew is identified as 1/2 - 16 x 2”, this means the Nominal size , or body diameter is 1/2 inch;...