Philips HTS5310S/12 Service Manual page 13

5.1.1 Reprogramming of DVD version Matrix
After repair, the customer setting and region code may be lost.
Reprogramming will put the set back in the state in which it has left
the factory, ie. with the default setting and the allowed region code.
Model Region
HTS 5310S/12 Europe
HTS 5310S/51 Russia
HTS 5310S/61 Korea
HTS 5310S/75 Australia
HTS 5310S/93 China
HTS 5310S/98 Asia Paci c
To reprogram do as follows:
1) Power up the set and select DISC source.
3) Press the following buttons on the Remote Control:
<9> <9> <9> <9> <AUDIO> <7> ........... for HTS 5310S/12
<9> <9> <9> <9> <ZOOM> <4> ........... for HTS 5310S/51
<9> <9> <9> <9> <ZOOM> <3> ........... for HTS 5310S/61
<9> <9> <9> <9> <ZOOM> <2> ........... for HTS 5310S/75
<9> <9> <9> <9> <ZOOM> <1> ........... for HTS 5310S/93
<9> <9> <9> <9> <AUDIO> <9> ........... for HTS 5310S/98
4) The display shows
YYYY = model number (eg. 8300, 8500, etc.)
ZZ = slash stroke version (eg. 01, 69, etc.)
5.1.2 Procedure for check Software version
1) Power up the set and select DISC source.
4) The TV screen will shows:
PPPP-Vxx YYYYY-ZZ
SERVO: GGGGGGGG REG:DD
PPPP = LX1S, LX1D or LX2W
xx = version number
YYYYY = model # - 3000S / 2000D / 5000W
ZZ = stroke version
DD = region code
GGGGGGGG = version for servo code
5.1.3 Burning of rmware
1. Unzip the zip-archive attached with this service information.
2. Start the CD burning software and create a new CD Project
(Data disc) with the following settings:
a. File System: ISO9660
b. Format: MODE 2/XA
c. Recording format: Single Session (Track at once),
Finalized CD
3. Place the content of the zip-archive into the root directory of the
new CD project.
4. Burn the data onto a blank CDR or CDRW.
Note: ISO9660 is mandatory, UDF discs are not supported!
The nal CDROM must not contain any other data except
the le from the zip-archive.
Service Test Program
Region Code TV Type
2 PAL
5 PAL
3 PAL
4 PAL
6 PAL
3 PAL
and the tray will close.
3139 785 31470
5.1.4 Procedure to upgrade the rmware
1. Power up the set and open tray.
2. Insert the prepared Upgrade CDROM and close the tray.
3. The set will display:
The whole process takes less than 2 minutes.
Note: Do not press any button or interrupt the main supply upgrading
process,Otherwise the set may become defective.
4. When the upgrade is completed, the tray will close automatic.
5. The tray will close and the set will go to Standby mode
automatically when the upgrade process is completed.
5.1.5 Procedure to check the rmware version to con rm
upgrading
1. Power up the set and open tray.
2. Press the <Menu Display> button on the Remote Control.
3. The rmware version will be displayed on the top left hand corner
of the OSD.
5.1.6 Trade Mode
Trade mode is a feature that will block all set keys when enabled. It is
for dealers to prevent customers fromremoving disc, changing source
etc using the set keys.Rotary and Remote Control (RC) keys are still
allowed inTrade mode.
To activate Trade Mode:
1) Power up the set and select DISC source.
3) Then press buttons <2> <5> <9> on the RC.
4) The display shows
Trade Mode is now enabled.
To deactivate Trade Mode:
1) Power up the set and select DISC source.
3) Then press buttons <2> <5> <9> on the RC.
4) The display shows
Trade Mode is now disabled.
5.1.7 Procedure to change Tuner Grid (not for all versions)
Note: Repeating the same action will toggle back to its previous
tuning grid setting.
5 EN 13
and the tray will close.
and the tray will close.