Shutdown Procedure; Deck Cooking (Water Spray) - Where Fitted (Water Cooled Models); Telescopic Laundry Arm - Manual Control (Water Cooled Models); Important Warning - B+S UFWSP Series Installation, Operating And Servicing Instruction Manual

Shutdown Procedure

1. Turn main gas valve to 'OFF'.
2. Turn pilot control valve clockwise to turn off.
3. Observe pilot flame is extinguished.
Deck Cooking (Water Spray) – Where Fitted (Water Cooled Models)
Deck cooling must be activated whenever the main stock pot burners are in use to prevent the deck of
the appliance from buckling and distorting. To activate;.
1. Locate spindle on front panel with 'Deck' sticker located above it.
2. Turn spindle anti-clockwise to activate water spray deck cooling. Ensure water pressure is
regulated (by turning spindle clockwise/anti-clockwise) so that only a thin layer of water remains
on the deck and trickles into the waste gutter.
3. When main burner/s is not in use ensure water is turned off by turning spindle clockwise.
Telescopic Laundry Arm – Manual Control (Water Cooled Models)
The telescopic laundry arm serves the purpose for cleaning the appliance and for filling the stock pot
cooking vessel with water to be used for cooking purposes. To activate;
1. Locate spindle on front panel with 'Spout' sticker located above it.
2. Turn spindle anti-clockwise to activate water from laundry arm.
3. To cease water flowing from laundry arm, turn 'Spout' spindle clockwise.
NEVER LEAVE WATER RUNNING FROM TELESCOPIC LAUNDRY ARM WHILST POSITIONED
OVER THE STOCK POT SUPPORT RING WITH NO POT/PAN POSITIONED ON IT. ALWAYS MOVE
TELESCOPIC LAUNDRY ARM PARALLEL TO THE SPLASHBACK OG THE APPLIANCE WHENNOT
IN USE. DIRECT FLAME CONTACT WITH LAUNDRY ARM MAY DAMAGE OPERATION OF
Waterset Automatic Laundry Arm (WokSpout) – Where Fitted
The WokSpout automatically shuts off the water flow when it I moved away from
the stock pot itself (as illustrated to below). It is recommended that the WokSpout
is kept parallel to the splashback of the appliance when not in use. The WokSpout
arm serves the purpose for filling the stock pot cooking pan with water to be used
for cooking purposes.

To activate, move the spout over the stock pot as required.

To stop water flow, move spout back to a position that is either parallel or 90
to the splashback of the appliance.
NEVER LEAVE WOKSPOUT IN OFF POSITION LOCATED BETWEEN THE TWO WOK RINGS WHILST
THE MAIN BURNERS ARE IN OPERATION.
Telescopic Laundry Arm Operation with Knee Valve – Where Fitted
The Laundry arm also serves the purpose of cleaning the appliance and/or for filling a stock pot vessel with
water to be used for cooking purposes.
Flow cycle is actuated by deflection and release of the flow lever in any direction from the rest position. The
adjustable flow rate automatically turns off with a non-concussive action after approximately 15 seconds.
Closing time is not adjustable.

IMPORTANT WARNING!

LAUNDRY ARM SPOUT.
9
o