Installation
Unpacking
All transit bolts and packing must be
removed before using the appliance.
You are advised to keep all transit
devices so that they can be refitted if the
machine ever has to be transported
again.
1. After removing all the packaging,
carefully lay machine on it's back to
remove the polystyrene base from the
bottom.
HEC0008
2. Remove the power supply cable and
the draining hose from the hose
holders on the rear of the appliance.
HEC0001
3. With a suitable spanner unscrew and
remove the central rear bolt
HEC00022
4. Unscrew and remove the two large
rear bolts
.
C
HEC0003S
5. Remove the bracket
the six smaller bolts
the relevant plastic spacer E.
D
HEC0011S
.
A
HEC0023
installation electrolux 39
A
and the six smaller bolts
B
C
B
B
C
D
C and
E
C
C
GB
and tighten up
slide out