Snapper 2167519B Safety Instructions & Operator's Manual page 28

21" STEEL DECK
WALK MOWERS
SERIES 19
Product Specifications
Deck Size
Height of Cut
Transmission Type
Ground Speed
Engine Power - Briggs (Quantum) 6.50 ft-lbs (gross torque)
Engine Power - Briggs (Intek)
Engine Power - Kawasaki
Engine Displacement - Briggs (all)
Engine Displacement - Kawasaki
Fuel Tank Capacity - Briggs (all)
Fuel Tank Capacity - Kawasaki
Engine Power Rating Information: The gross power rating for individual gas engine models is labeled in accordance with
SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating perform-
ance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060
RPM; horsepower values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other
things, ambient operating conditions and engine-to-engine variability. Given both the wide array of products on which engines
are placed and the variety of environmental issues applicable to operating the equipment, the gas engine will not develop the
rated gross power when used in a given piece of power equipment (actual "on-site" or net power). This difference is due to a
variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump,
etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability.
Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this
Series engine.
Snapper Products
535 Macon Street
McDonough, GA 30253
26
21 in
1.25 - 4 in
Gear
1 - 4 mph
8.75 ft-lbs (gross torque)
6.0 hp (gross)
190 cc
180 cc
1.6 qt
2.1 qt
Common Service Parts
Cutter Blade (Air-Lift Compatible)
Drive Belt (Engine)
Drive Belt (Transmission)
Parts Manual
1-800-935-2967
Part Number
7019795
7046784
7012354
7006150
www.snapper.com