Table of Contents
Advertisement
The Host Filtering Table
It can be confusing to know which host-to-host and host-to-port
filter sets devices are in. All devices entered into these filter sets
are added to the bridge's host filtering table. The Host Filter Info
screen is a very useful screen which uses this host filtering table to
show which sets devices are in. You can also use it to change the
contents of the filter sets.
Select HOST FILTER INFO from the Bridge Filters menu.
The Host Filter Info screen appears, as shown in
screen lists all the host-to-host and host-to-port filter sets. Next to
each set is a number, 0 or 1 . If the device entered in the HOST
NAME field is a member of any of the filter sets, a 1 will be shown
next to it. A 0 will be shown next to the sets the device is not a
member of.
Figure 3-10 Host Filter Info
Host Name: Text Field. Enter the device's host name. The screen
changes to show the device's set membership.
Host Address: Text Field. Enter the address of the device. If the
host name was recognized, the address will appear automatically.
DUA1860-0AAA01
Custom Filter Configuration
Figure
3-27
3-10. The
Advertisement
Table of Contents
