Table of Contents
Advertisement
Should alarms repeat themselves after all restart attempts, please call service assistance.
Maintenance
Before any maintenance or cleaning procedure, please switch off the appliance and disconnect it
from main by unplugging the power plug.
CO2 bottle replacement
When the CO2 led turns on, it's necessary to replace the CO2 bottle as described below:
1.
Pull appliance from cabinet
(A-Fig. 12).
2. Grab the CO2 bottle and extract it from it's
locking clip.
3. By holding the bottle fixed, turn the pressure
regulator clockwise to remove from the bottle
(fig. 13).
4. Place new bottle under the regulator and screw
counter clockwise till fully tightened.
5. Lock bottle in place and close cabinet.
Fig. 12
Fig. 13
21
Advertisement
Table of Contents
