Install Lift Rod - Snapper 1695195 Installation Instructions Manual

Sub-Frame Hitch

Install Lift Rod

1. Slide the lift lever (A, Figure 8) onto the end of the
tractor lift shaft (B) under the right side footrest.
2. Use the tabs on the lift lever (A) to capture the tractor
lift arm. Secure in place with a clevis pin (D) and
safety clip (C).
3. Insert the rear of the lift rod (B, Figure 9) into the bot-
tom of the lift lever (A). Secure with a clip (C).
Perform lift rod adjustment according to the procedure
found in the attachment operator's manual.
D
A
B
C
Figure 8. Install Lift Lever
A. Lift Lever
B. Lift Shaft
C. Safety Clip
D. Clevis Pin
A
C
Figure 9. Install Lift Rod
A. Lift Lever
B. Lift Rod
C. Clip
5
Installation Instructions
B