Using Mask Fit - ResMed VPAP COPD Welcome Manual

Adjusting ramp time
Designed to make the beginning of treatment more comfortable, ramp time is the period during which
the pressure increases from a low start pressure to the treatment pressure. To adjust your ramp time:
1. From your HOME
screen, turn
until the RAMP
screen is displayed
in blue.

Using Mask Fit

You can use Mask Fit to help you fit your mask properly. This feature delivers CPAP pressure for a
three-minute period, prior to starting treatment, during which you can check and adjust your Mask Fit to
minimize leaks.
1. Fit your mask as described in the mask user guide.
2. From your HOME screen, push and hold
One of the following MASK FIT screens is displayed:
3. If necessary, adjust your mask, mask cushion and headgear until Mask Fit indicates Good.
After three minutes, the pressure reverts to the set pressure and treatment will begin. You can end
Mask Fit at any time by pressing
8
2. Press .
The selection is
highlighted in
orange.
for three seconds.
.
3. Turn until the
ramp time you
require is displayed.
4. Press to
confirm your choice.