Customisable - Extraction Pre-Infusion Profile; Restore All Default Settings - Sunbeam BARISTA MAX EM5300 User Manual

Customisable - Extraction Pre-infusion Profile

You can select from three Pre-infusion
Profiles to cater for personal preferences.
- Gentle Pre-infusion: Small defined
amounts of water are introduced into
the tamped coffee grinds, gently adding
moisture to bloom the coffee grinds in
preparation for a steady water flow.
For a balanced tasting espresso.
This is the default profile setting.
- Distinct Pre-infusion: A single distinct
dose of water is released into the tamped
coffee grinds, followed by a brief rest
period, then a steady water flow.
For a more bright tasting espresso.
- Constant Pre-infusion: Delivers a constant,
steady water flow from start to finish.
For a more sharp tasting espresso.
• Access Pre-infusion Custom Mode
- The machine is ON and in the READY state.
- Simultaneously press & hold the
ON/OFF, ONE & TWO CUP BUTTONS for
4 seconds. The machine will beep and
the ON/OFF LIGHT begins to flash.
PRESS & HOLD TOGETHER 4 SEC
ON /OFF ON /O MANUAL SHOT

Restore All Default Settings

You can easily reset all settings to the
factory defaults.
Restore All Default Settings
-The machine is on and in the READY state.
- Press & hold the ON/OFF & all 3
EXTRACTION BUTTONS at the same time
for 4 seconds.
PRESS & HOLD TOGETHER 4 SEC
ON /OFF /OFF MANUAL SHOT NUAL
• Selecting Pre-infusion Profiles
The EXTRACTION LIGHT illuminated
signals the Pre-infusion Profile selected.
The default setting is:
- Gentle = ONE CUP BUTTON.
The ONE CUP LIGHT is illuminated.
MANUAL SHOT
- To select a Pre-infusion Profile press:
- Distinct = TWO CUP BUTTON.
The TWO CUP LIGHT will illuminate.
MANUAL SHOT
- Constant = MANUAL SHOT BUTTON.
The MANUAL SHOT LIGHT will illuminate.
MANU MANUAL SHOT
• Confirm Pre-infusion Profile
- Press the ON/OFF BUTTON to save your
selection. The machine will beep & exit
the custom mode.
- The machine will return to the READY state.
- The machine will beep and the ON/OFF,
EXTRACTION BUTTONS & DIAL LIGHTS
will all flash together three times.
ON /OFF MANUAL SHOT
- All default settings have been restored.
- The machine will return to the READY state.
23