Yamaha JT1 Series Assembly Manual page 20

A. Charging
Battery
1. Remove the vent tube and
filler caps.
Blow
gently
through the
vent and vent tube to make
sure proper venting is tak-
ing place.
2. Fi II each ce II to the top
level line with fresh elec-
trolyte.
3. Charge the battery at O. 2
A(MAX.)
until specific
gravity is 1 ,260 .:.. 1,280.
4. lnstal I the battery in the
frame, and connect the
lead wires .
5. Make sure the battery
ground (-) strap is con-
tacting clean metal at the
frame mounting point.
31