Call Settings - BENQ-SIEMENS A38 Operating Instructions Manual

of A38 en A31nnn-Xnnnn-Xn-n-nnnn (30.05.2006, 20:58)
right page (23)

Call Settings

Settings Call Settings
>
Answer Mode
Set whether calls can be accepted by
pressing any key (except for
only by pressing
Any Key: Set calls to be accepted by
•
pressing any key.
Send Key: Set calls to be accepted only
•
by pressing
Connect Alert
Set the phone to ring, vibrate, or flash
the backlighting when the call recipient
has answered your call.
Minute Minder
If activated, the phone beeps at the set
interval time during a call.
1. Press /
function on.
2. Press to save settings.
Show Number
When you make a call, your number can
be shown or hidden on the display of the
Preset
called party. Set
setting of the network operator.
Call Divert
* Network support dependent.
You can specify the conditions under
which the call types should be diverted
) or
.
.
to switch the
to use the default
to your voicemail box or another
number.
Forward All: All calls are diverted.
•
When activated,
status bar of the idle display.
When Busy: A call is diverted if
•
another call is in progress.
No Reply: A call is diverted if not
•
answered.
Not Reachable: A call is diverted if the
•
phone is switched off or is out of
range.
Cancel All: Cancel all call divert
•
settings.
Call Barring
* Network support dependent.
Restrict the dialling or receiving of
certain calls. To activate or cancel call
barring, you have to enter the network
password provided by your network
operator.
All Outgoing: All outgoing calls except
•
emergency numbers are barred.
• Intl.Out: Only local calls can be made.
Intl. Except Home: International calls
•
are not permitted. However you can
make calls to your home country
when abroad.
All Incoming: Phone is barred for
•
incoming calls.
Incoming When Roaming: You do not
•
receive calls when you are outside
your home network.
Settings 23
is displayed in the