Mounting The Device; Mounting Options; Mounting Precautions - Brocade Communications Systems VDX 6940 Series Hardware Installation Manual

Mounting the device

∙

Mounting options.............................................................................................................................................................................................................. 33

∙

Mounting precautions.....................................................................................................................................................................................................33

∙
Standalone installation .................................................................................................................................................................................................. 34
∙
Installing the Universal Four-Post Rack Kit (XBR-R000296)...............................................................................................................34
∙
Installing the Universal Two-Post Rack kit (XBR-R000294)................................................................................................................. 48
Mounting options
You can install the device in several ways:
∙
As a standalone unit on a flat surface, for example a desk top. Use the rubber feet included with the shipment to secure the
device on the surface. No other equipment is required for desktop installation.
∙
In a four-post EIA rack: You will need a Universal Four-Post Rack Kit (XBR-R000296) to install devices in EIA racks that are
between L-13.7 to 81.28 cm deep (L-5.0 to 32.0 in.), where L is the chassis depth.
∙
In a two-post Telco rack: You will need a Universal Two-Post Rack Kit (XBR-R000294) to install 1U and 2U devices in a two-
post telecommunications (Telco) rack.
NOTE
These rack mount kits are supported for this device at the date of this publication. For the latest support information, contact
your Brocade representative.
Mounting precautions
The following precautions specifically apply to mounting the device.
CAUTION
Make sure the airflow around the front, sides, and back of the device is not restricted.
CAUTION
Never leave tools inside the chassis.
DANGER
Use safe lifting practices when moving the product.
DANGER
Mount the devices you install in a rack as low as possible. Place the heaviest device at the bottom and progressively place
lighter devices above.
CAUTION
Do not use the port cover tabs to lift the module. They are not designed to support the weight of the module, which can fall and
be damaged.
CAUTION
To prevent damage to the chassis and components, never attempt to lift the chassis using the fan or power supply handles.
These handles were not designed to support the weight of the chassis.
Brocade VDX 6940 Hardware Installation Guide
53-1003495-06 33