About The Html Viewer Function - Sony VPL-FHZ120L Operating Instructions Manual

6
Click on [Service] to display the Service page.
The system service function is set.
Service button
Start DDDP Service: Set DDDP to enabled or
disabled. For details, refer to the DDDP
specifications from AMX Corporation. The
function is disabled at the factory default.
Crestron Control: For details, refer to the
product catalogues, etc., from Crestron
Corporation.
-IP Address: Input the Crestron system server.
-IP ID(HEX): Input the IP ID(HEX) for the CIP
protocol.
-Port No.: Input the port number for the CIP
protocol server.
Resetting the network settings
Reset the network settings to their factory
defaults.
Reset button
Reset: Reset all Web browser settings to their
factory defaults.
Reset
42
.

About the HTML Viewer Function

You can set the HTML viewer (INPUT G) as the
background when no signal is input to the
projector or the projector is not operated.
Select "Input-G" in "Background" of the Function
menu when using the HTML viewer.
When no signal is detected, the input source
automatically switches to INPUT G. When an input
signal is detected, it switches from INPUT G to the
previous input signal.
Recommended format for still images 
(For <img> tag)
Format Resolution
JPEG
PNG
Up to 1920×1080
BMP
GIF
The HTML viewer function is displayed by INPUT G.
Switch to INPUT G using the input key on the
Remote Commander.
The HTML file can be loaded from the network or
USB memory.
USB memory
Network
About the content
 The content is displayed at 1920×1080 fixed
resolution.
 You can set the time used on the HTML viewer in
the Date & Time page (page 44).
 You can reload the content using the ENTER key
on the Remote Commander or the unit.