The Function Menu - Sony VPL-FHZ120L Operating Instructions Manual

The Function Menu

The Function menu is used for setting various functions of the projector.
Setting items
Smart APA
Background
Start Up Image
Color Calibration
All Reset
Description
On/Off: When set to "On," executes APA automatically when a signal is input.
Executes APA when a computer signal is input via the RGB input terminal (INPUT A, INPUT
B).
Enabled when INPUT A, INPUT B, INPUT C, or INPUT D is selected.
Blue/Black/Image/Input-G: Sets the background for when there is no input signal.
When set to "Image," the Start Up Image is displayed. When using the two-picture display
mode and there is no input signal, the background will be black even if you set this item to
"Image."
When set to "Input-G," the background changes to INPUT G. The setting is not updated
immediately even when selecting "Input-G." It is reflected the next time when there is no
input signal (page 42).
On/Off: When set to "On," the Start Up Image is displayed on the screen upon startup of
the projector.
Corrects color drift on the entire screen that has occurred over time.
The color calibration pattern is displayed while selecting this menu. When you press the 
/ key on the projector or the  key on the Remote Commander, the pattern is turned off
and this menu is disabled.
Color drift may not be corrected properly due to environmental factors, such as
temperature and dust, or changes over time.
Auto: If you select "On," it corrects color drift automatically when the projector is turned off
after certain time of use.
Start: When twenty minutes have passed after the light has been turned on, it
immediately corrects color drift.
Return: Restores the settings when performing the previous color calibration. You cannot
select this if you have not performed the color calibration.
Reset: Restores the factory default settings.
All settings are initialized to their factory preset values.
28