The Picture Menu - Sony VPL-FHZ120L Operating Instructions Manual

The Picture Menu

For adjusting the picture for each input signal.
Setting items
Picture Mode
Reset
Contrast
Brightness
Color
Hue
Color Temp.
Sharpness
Light Settings
Dynamic Control
Light Output Mode
Constant Brightness
Description
Dynamic: Emphasizes the contrast to produce a "dynamic" picture.
Standard: Makes the picture be natural and well balanced.
Brightness Priority: Makes the picture bright to suit a bright environment.
Multi Screen: Optimizes the picture quality to suit projecting using multiple projectors.
sRGB: Displays the picture quality with sRGB color gamut. (For VPL-FHZ120L only)
The picture settings are initialized to their factory preset values.
However, "Picture Mode" and "Custom 1," "Custom 2," "Custom 3," and "Custom 4" of
"Color Temp." do not return to the factory preset values.
The higher the setting, the greater the contrast. The lower the setting, the lower the
contrast.
The higher the setting, the brighter the picture. The lower the setting, the darker the
picture.
The higher the setting, the greater the intensity. The lower the setting, the lower the
intensity.
The higher the setting, the more greenish the picture becomes. The lower the setting, the
more reddish the picture becomes.
9300K/7500K/6500K: The higher the temperature, the more bluish the picture. The lower
the temperature, the more reddish the picture.
Brightness Priority 1: Projects images at the maximum brightness.
Brightness Priority 2: Projects bright images.
Custom 1/ Custom 2/ Custom 3/ Custom 4: An adjusted color temperature setting can be
stored for each item.
The factory settings are as follows: "Custom 1": same as the "9300K" setting, "Custom 2":
same as the "7500K" setting, "Custom 3": same as the "6500K" setting, "Custom 4": same
as the "Brightness Priority 1" setting.
The higher the setting, the sharper the picture. The lower the setting, the softer the
picture.
On/Off: Brightness is adjusted automatically according to image content. Dark images are
projected with brightness adjusted, leading to energy-saving. Bright images are projected
brightly, without adjusting brightness.
Adjusts brightness of the light source.
Standard: The image becomes brighter, and power consumption becomes higher.
Middle: Power consumption becomes lower; however, the image will darken.
Low: Power consumption becomes even lower and the image will darken further.
Extended: The images becomes dark but extended projection is enabled.
Custom: You can adjust brightness as prefer.
On/Off: Available when "Light Output Mode" is set to "Standard," "Middle," "Low," or
"Custom." Outputs with a constant brightness at the light source output (approximately
85%) that reduces the percentage of each mode.
The projector may not be able to maintain the brightness in an environment with a lot of
dust and dirt.
24