Dell EqualLogic PS6100 series Configuration Manual page 28

•
10G KR is the only supported IOM
•
Switches: Force10 MXL, PowerConnect M8024-k, M8428-k
•
Pass-through: 10Gb-K pass-thru modules only with external switches
The following are basic networking recommendations for implementing the PS-M4110 Storage Blade.
•
IOMs must be Interconnected
•
Datacenter in a Box: IOMs directly interconnected
•
External Switches can be used to provide interconnection if rack mounted arrays are needed.
•
Must use "Single Fabric" I/O module Placement; Supported Fabrics are "A" and "B" only
•
Fabric A not supported on older M1000e systems (Mid-plane v1.0); Mid-plane upgrade kit available
•
Fabric B supported on all M1000e system
•
It is recommended that PS-M4110 be placed into their own pool
March 2013 Dell EqualLogic Configuration Guide v14.1 1-19