Dell EqualLogic PS6100 series Configuration Manual page 104

Table 38 M-Series I/O module Pass-Through to external switch infrastructure
M-Series I/O module Pass-Through to external switch infrastructure
•
Fewer switch hops
•
Fewer switches to manage
•
SAN can support M1000e enclosures and rack or tower
stand-alone servers
•
SAN traffic isolated outside of M1000e enclosure
•
Less expensive that multi-tiered switch solution
•
Supports non-dell branded switching as a single vendor
solution
•
No firmware to update on the pass-through modules.
•
Additional M1000e enclosures are added in similar fashion to diagram above
•
Supported with stacked or non-stacked external SAN infrastructures
•
This strategy works for a single fabric or dual fabric M-Series I/O module configuration (See
Section 0 for details)
•
This is the simplest choice if external switches are from a different vendor.
March 2013
Advantages
Other Notes
Dell EqualLogic Configuration Guide v14.1
Concerns
•
Complex cabling in a rack
environment.
9-95