Advertisement
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
WARNING: When using tool, basic safety precautions should always be followed to reduce
the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don't expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3.
Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords.
4.
Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5.
Do not force tool. It will do the job better and more safely at the rate for which it was
intended. Do not use inappropriate attachments in an attempt to exceed the tool
capacity.
6.
Use the right tool for the job. Do not attempt to force a small tool or attachment to
do the work of a larger industrial tool. There are certain applications for which this tool
was designed. Do not modify this tool and do not use this tool for a purpose for which
it was not intended.
SKU 45935 / 45936
45935-45936a.p65
2
Specifications
ITEM
9.6 VDC; Speed: 0 to 500 RPM
Drill
Variable speed switch
Forward / Reverse Button
3/8 inch keyed chuck - Model 45936
Chuck
3/8 inch keyless chuck - Model 45935
Torque Settings
1 ~ 5, and Drill
3 ~ 5 hour recharge
Battery Charger
Input voltage: 120 VAC, 60 Hz, 94 mA
Output voltage: 12 VDC, 330 mA
Battery
9.6 VDC, 1.3 amp-hour (Ni-Cd)
Total Weight
3.1 Lbs. (with battery)
Save This Manual
Safety Warnings and Precautions
Page 2
DESCRIPTION
10/15/03, 2:51 PM
Advertisement
