Functional Description; Putting Into Use; Specifications; Operating Instructions - Drill Master 67025 Operating Insructions

FunCtIOnaL DESCRIptIOn

Specifications

Battery Type
Charger
Chuck Capacity/
Type
Speeds
Torque Settings
*
Please Note: When in Hammer Mode, Torque
setting is not adjustable.
InItIaL tOOL SEt up
Read EntIRE ImpORtant
SaFEtY InFORmatIOn
section at beginning of manual
including all text under
subheadings therein before set
up or use of this product.
note: For additional information regarding
parts listed in following pages, see
Assembly Diagram at end of manual.
unpaCkIng
Make sure item is intact and undam-
aged. If parts are missing or broken, call
Harbor Freight at 1-800-444-3353.
InStRuCtIOnS FOR

puttIng IntO uSE

Read the EntIRE ImpORtant
SaFEtY InFORmatIOn
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
SKU 67025
NiCd / 18V / SKU 67029
SKU 67031
3/8" / Keyless
0-450 RPM / 0-1300 RPM
24 (Forward and Reverse)
For technical questions, please call 1-800-444-3353.
FROm aCCIDEntaL
OpERatIOn: turn tool off
and remove Battery pack
before assembling or making
any adjustments to the tool.
note: For additional information regarding
parts listed in following pages, see
Assembly Diagram at end of manual.
Functions
Speed Control Lever
Torque Selector
Chuck
Chuck Adjusting
Knob

OpERatIng InStRuCtIOnS

Read the EntIRE ImpORtant
SaFEtY InFORmatIOn
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
Inspect tool before use, looking
for damaged, loose, and
missing parts. If any problems
are found, do not use until
repaired.
tO pREVEnt
SERIOuS InjuRY
Drill Bits
Trigger
Page 7