Setting Position Location - Kyocera K323 User Manual

Customizing.fm Page 41 Thursday, September 7, 2006 4:06 PM
Data Settings
Setting Com port speed
The Com Speed sets the data rate at which your
phone connects to a laptop or PC, or at which it
sends and receives over-the-air text messages.
1.
Connect the phone to the laptop or PC.
2.
Set the Com speed.
3. Menu
Press to select
4.
Press left or right to select
Settings & Tools
.
5.
Press up or down to select
→
Call Settings Data Settings
6.
Select the speed. The options are:
115.2 kbps 230.4 kbps
(default),
Note:
There may be a higher charge for
making calls using high-speed data in areas
where service is available. Check with
Verizon Wireless for details.
Connecting to a TTY/TDD device
You can connect the phone to a TTY device for the
Note:
hearing impaired. Enable TTY only when
using the phone with a TTY device.
1.
Connect the TTY device to the phone.
2. Menu
Press to select
3.
Press left or right to select
Settings & Tools
.
4.
Press up or down to select
→
Call Settings TTY Mode
User Guide for the Kyocera K323 Phone — Rev002 DRAFT
5.
Select an option.
–
–
Using a Hearing Aid device
You can reduce interference while using the
phone with a hearing aid device by activating the
phone's T-Coil HAC feature.
feature only when using the phone with a hearing
.
aid device.
1.
Press
2.
Press
Settings & Tools
→
Port Speed
.
3.
Press
19.2 kbps
,
Call Settings
Other
, and .
4.
Press
press

Setting position location

This setting allows you to share your location
information with network services other than
emergency services (For example: 911, 111,
999, and 000) in markets where service has
been implemented.
Note:
in digital mode. You do not have the option of
.
turning off the locator to emergency services.
1.
Press
2.
Press
Settings & Tools
.
TTY Full
turn on TTY.
TTY Off
disable TTY Mode.
Note:
Enable this
Menu
to select .
left or right to select
.
up or down to select
→
Hearing Aid
.
up or down to select
.
This feature works only when your phone is
Menu
to select .
left or right to select
.
On
and then
41