Configuring The Management Port - Dell EqualLogic PS4100 Hardware Maintenance Manual

PS4100 Hardware Maintenance Guide Maintaining Control Modules

Configuring the Management Port

Configuring the 10/100Mbps management port involves hardware steps and software steps. The
management port is restricted to group management traffic only; it will not carry iSCSI I/O.
Note: This is considered an advanced configuration, available if your environment requires this level of
security.
Hardware Steps
1. Make sure your network environment can support a dedicated management network, with a subnet that
is separate from the subnets for iSCSI traffic.
2. On both control modules, connect the port labeled MANAGEMENT to the management network.
Software Steps
See the Group Administration guide for the procedure to configure the management network in the Group
Manager GUI.
27