Removing The Microsd Card - Dell EqualLogic PS4100 Hardware Maintenance Manual

PS4100 Hardware Maintenance Guide
Before replacing a microSD card:
• Attach an electrostatic wrist strap, as described in
• See Replacing a Control Module on page 22

Removing the MicroSD Card

Caution: To reduce the risk of losing or damaging the microSD card, do not remove it until you are ready
to install it in the replacement control module.
1. Firmly push the card into its housing to release the spring mechanism
will be partially ejected from the housing.
2. Gently pull the card straight out of the housing.
3. Place the microSD card on a flat surface where it will be protected from electrostatic charge.
Protecting Hardware on page
for instructions on removing a control module.
Figure 19 Ejecting the MicroSD Card
Maintaining Control Modules
1.
(Figure 19). The microSD card
25