Base Station; Wall Mounting - GE 27909 User Manual

Base Station

1. Choose an area near an electrical outlet and a telephone wall jack
(RJ11C), and place your cordless telephone on a level surface,
such as a desktop or tabletop, or you may mount it on the wall.
2. Plug one end of the telephone line cord into the TEL LINE jack on
the bottom of the base and the other end into a modular jack.
3. Plug the AC power adaptor into the electrical outlet and the DC
connector into the jack on the bottom of the base.
4. Place the handset in the base cradle. The charge/in use indicator
turns on, verifying the battery is charging.
5. Allow the phone to charge for
don't properly charge the phone, battery performance is
compromised.
14 hours prior to first use. If you
CAUTION: Use only the Thomson Inc. 5-2735 power
adaptor that came with this unit. Using other power
adaptors may damage the unit.

Wall Mounting

1. Rotate the handset hook up with a coin,
2. Insert the wall mount bracket into the socket at the front side of the
unit. (To uninstall the wall mount bracket, turn over the base, press
and hold the button on the bottom of the base and pull out the
bracket at the same time.)
3. Plug one end of the straight telephone line cord into the jack on the
bottom of the base.
4. Feed the line cord through the groove and plug the end into the
modular telephone jack.
5. Slip the mounting holes (on the bottom of the base) over the wall
plate posts and firmly slide the unit down into place.
7