Dial Mode - GE 27909 User Manual

press the 4 key twice for the letter H.
NOTE: If you make a mistake, press cid/vol (- or +) button
to move the cursor forward or backward, and then use the
mute/Clear button to backspace and delete one character at
a time.
NOTE: To avoid confusion, * key is a function key to
switch/toggle between the upper case & low case of
characters during text edit.
4. Press the Menu button to save your name. You will hear a
confirmation tone and the display shows Saved.
Setup BS
1. Make sure your phone is OFF (not in talk mode).
2. Press the Menu button to go to the main menu.
3. Press cid/vol (- or +) button to scroll to Setup BS.
4. Press Menu button to confirm and you may program the following
items: LAC (local area code), Dial mode and BS Backlight.
Area Code
The telephone uses the pre-programmed area code to determine the
number format to display when a valid Caller ID record is received.
The pre-programmed area code is also used for the Dialback feature.
From the Setup BS Menu:
1. Press the cid/vol (- or +) button to scroll to the Area code sub-
menu.
2. Press Menu button to enter the menu. Enter area code shows in
the display.
3. Use the touch-tone pad to enter your 3-digit area code.
4. Press Menu button to save the setting.

Dial Mode

From the Setup BS Menu:
1. Press the cid/vol (- or +) button to scroll to the Dial mode sub-
menu.
2. Press Menu button to enter the menu and use the cid/vol (- or +)
button to select Tone or Pulse.
3. Press Menu button to save your selection.
BS Backlight
From the Setup BS Menu:
1. Press the cid/vol (- or +) button to scroll to the BS Backlight sub-
menu.
2. Press Menu button to enter the menu and use the cid/vol (- or +)
button to select On or Off.
3. Press Menu button to save your selection.
Date/Time
1. Make sure your phone is OFF (not in talk mode).
2. Press the Menu button to go to the main menu and use cid/vol (- or
+) button to scroll to Date/Time.
3. Press Menu button to enter the menu. Year 2006 shows in the
display.
4. Use the touch-tone pad to enter the last two digits of the current
year (range: 00 to 99).
5. Press Menu button to save the year setting and proceed to date
setting.
6. Date 01/01 shows in the display. Use the touch-tone pad to enter
two digits for current month and day respectively.
7. Press Menu button to save the month/date setting and proceed to
time setting.
8. Time 12:01p shows in the display. Use the touch-tone pad to enter
four digits for current time and use cid/vol (- or +) button to scroll
through "p" (pm) and "a" (am).
9. Press Menu button to save the setting. Saved shows in the display.
10. The date and time will be set automatically when it receive a call
with Caller ID.
10