Editing A Redial Record Before Dialing; Storing A Redial Record In Phone Book; Deleting A Redial Record; Deleting All Redial Records - GE 27909 User Manual

Inserting a Pause in the Dialing Sequence
Press the #pause button twice to insert a delay in dialing sequence
when a pause is needed to wait for a dial tone (for example, after you
dial 9 for an outside line, or to wait for a computer access tone.) Each
pause counts as one digit in the dialing sequence, and is shown as P in
the display.
Redial
To quickly redial a number you dialed:
1. Make sure the phone is OFF (not in talk mode).
2. Press the TALK/call back button.
3. Press the redial button first, then use the cid/vol (- or +) button to
select the desired redial number.
NOTE: You may choose from 10 last dialed numbers.
4. Press the Menu button. The number dials automatically.
-OR-
1. Make sure the phone is OFF (not in talk mode).
Press the redial button. Then use the cid/vol (- or +) button to
2.
select the desired redial number.
NOTE: You may choose from 10 last dialed numbers.
Press the TALK/call back button. The number dials automatically.
3.

Editing a Redial Record Before Dialing

1. Make sure the phone is OFF (not in talk mode).
2. Press the redial button first, then use the cid/vol (- or +) button to
select the desired redial number.
3. Press the Menu button.
4. Press cid/vol (- or +) button to scroll to Select.
5. Press the Menu button to enter edit mode.
6. Press cid/vol (- or +) button to move the cursor forward or
backward. Use the touch-tone pad to add digits or press the
mute/Clear button to backspace and delete one digit at a time.
7. After editing, press TALK/call back to dial the modified redial
number.

Storing a Redial Record in Phone Book

1. Make sure the phone is OFF (not in talk mode).
Press the redial button first, then use the cid/vol (- or +) button to
2.
scroll to the desired redial number.
3. Press the Menu button.
4. Press cid/vol (- or +) button to scroll to Save number.
5. Press the Menu button to enter edit mode.
6. Enter name shows in the display. Input a name. Please refer to
section "Handset Name" for name editing method.
NOTE: A name must be input otherwise the record cannot be
stored.
7. Press the Menu button to save. Saved shows in the display. Repeat
steps 2 through 7 to save other records.

Deleting a Redial Record

1. Make sure the phone is OFF (not in talk mode).
2. Press the redial button first, then use the cid/vol (- or +) button to
select the desired redial number.
3. Press the Menu button.
4. Use the cid/vol (- or +) button to scroll to Delete?.
5. Press the Menu button to delete the record showing in the display.
Confirm? shows in the display.
6. Press the Menu button again to confirm the deletion. Deleted
shows in the display.
NOTE: Press the Flash/Exit button to return to the standby
mode without deleting any redial records

Deleting All Redial Records

1. Make sure the phone is OFF (not in talk mode).
2. Use the cid/vol (- or +) button to display any redial record.
3. Press the Menu button.
4. Use the cid/vol (- or +) button to scroll to Delete all?.
5. Press the Menu button. Confirm? shows in the display.
6. Press the Menu button again to confirm the deletion. All deleted
.
13