Related Manuals for Milwaukee M18 FOPH-CSA
Summary of Contents for Milwaukee M18 FOPH-CSA
- Page 1 OPERATOR'S MANUAL Cat. No. M18 FUEL™ 10" POLE SAW ATTACHMENT WARNING To reduce the risk of injury, user must read and understand operator's manual.
-
Page 2: General Power Tool Safety Warnings
GENERAL POWER TOOL • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left SAFETY WARNINGS attached to a rotating part of the power tool may Read all safety warnings, instruc- WARNING result in personal injury. -
Page 3: Specific Safety Rules
MILWAUKEE ® Causes and operator prevention of kickback: • Always wear eye, hearing, and head protection, Kickback may occur when the nose or tip of the guide and protective clothing and footwear, according bar touches an object, or when the wood closes in and to the operation being performed. - Page 4 • Use extreme caution when cutting brush and sap- your capability; contact Milwaukee Tool or a trained lings. The slender material may catch the saw chain professional for additional information or training.
-
Page 5: Functional Description
FUNCTIONAL DESCRIPTION SYMBOLOGY Volts Direct Current No Load Revolutions per Minute (RPM) Safety Alert Symbol Read operator’s manual Always wear eye protection and use proper personal protective equipment. Wear non-slip safety footwear Wear protective gloves Keep tool at least 15m (50') away from electric power lines. -
Page 6: Specifications
SPECIFICATIONS Cat. No........M18 FOPH-CSA 7. Wrap the new or sharpened chain around the Power Head .......... M18 FOPH guide bar in the direction indicated on the tool 91cm (3') Extension Attachment ... M18 FOPH-EXA RPM......High 0 - 4600 Low 0-3700 Chain Speed .......... - Page 7 Ensure the guide bar sprocket (at the tip) rotates Quik-Lok™ System freely. Extension Attachment • If the lubrication system still does not work prop- erly, contact a MILWAUKEE service facility. ® (M18 FOPH-EXA) Do not extend tool by more than one extension Transporting Tool attachment.
-
Page 8: Operation
OPERATION Never cut near power DANGER • Do not allow familiarity with this product to make lines, electric cords, or jams on any electrical cord or line, DO • NOT TOUCH THE BAR OR CHAIN! THEY CAN handle and your right hand on the rear handle BECOME ELECTRICALLY LIVE AND VERY DAN- •... - Page 9 • Make sure that the area in which you are cutting • the guide bar contact a log, branch, fence, or any other obstruction that could be hit while you are • The tool can be held in multiple ori- •...
- Page 10 Never attempt to lock the trigger in • During use, right hand holding power unit should WARNING the ON position. Proper Cutting Stance • • Cut only when visibility and light are adequate for • Check work area for hazards such as bees, rodents, WARNING prune.
-
Page 11: Maintenance
Return the tool, battery pack, and Springpoles charger to a MILWAUKEE service facility for ® Springpoles are dangerous and repair. After six months to one year, depending on... - Page 12 • CORRECT - 80° Produced automatically if correct • HOOK - “Grabs” and dulls quickly. Increases po- • BACKWARD SLOPE - Needs too much feed pres- sure, causes excessive wear to bar and chain. Depth Gauge Clearance • The depth gauge should be maintained at a Left Hand Cutters clearance of 0.6 mm.
- Page 13 To reduce the risk of personal in- WARNING jury and damage, never immerse your tool, battery pack or charger in liquid or Cleaning Clean dust and debris from vents. Keep handles clean, dry and free of oil or grease. Use only mild soap and a damp cloth to clean, since certain clean- ing agents and solvents are harmful to plastics and other insulated parts.
- Page 16 SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty ® . Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...