Table of Contents
Advertisement
Setting Parameters in the Job Parameters Window
Image/Graphics Quality
Graphics quality (Text, Line)
Select
to improve the text quality in a job.
High
Note: It is recommended that you use this option only if your source file
includes diagonal lines or text with jaggies.
Graphics quality (Text, Line)
for text quality. This option causes blends to appear smooth with
no banding, and displays crisp diagonal lines without (or with
minimal) jaggies (rough edges) that are the result of the limited
resolution of the print engine.
Image quality
Select
to improve the quality of images in a job.
High
refers to the ability to maintain the same detail and
Image quality
smoothness with different degrees of enlargement. This feature is
especially useful when your PostScript file includes several images
at different qualities—for example, images that were scanned at
different resolutions, were rotated, or downloaded from the
internet.
Trapping
Select the
1.
Enable Trapping
Note: If you don't select the Enable Trapping check box, it does not
affect trapping incorporated by DTP applications—for example,
Photoshop. FAF should not be used with application based trapping. In a
PostScript file that already contains trapping from the originating
application, it is not necessary to use IC-301 print controller trapping.
In the
2.
Frame thickness
thickness of the trapping frame.
Protect small text
Select this check box so that any text that is smaller or equal to
12 pt. is not framed during FAF.
refers to the Creo anti-aliasing algorithm
check box to apply trapping.
box, enter the desired value for the
165
Advertisement
Table of Contents
