Mounting The Chassis To The Case Assembly; Attaching The Antenna Receptacle To The Chassis - Kenwood TK-2317 Service Manual

DISASSEMBLY FOR REPAIR / 维修拆卸
8. Mounting the Chassis to the Case
Assembly
1. Confirm that the waterproof packing attached to the
circumference of the chassis is securely inserted in the
groove of the chassis a .
2. Insert the upper part of the chassis into the case assem-
bly b .
3. Press the chassis c and the case assembly together to
attach them.
Caution: If the packing of the SP/MIC does not come
to the correct position after attaching the chassis to the
case assembly, reposition the packing with your fi ngers.
9. Attaching the Antenna Receptacle to
the Chassis
Screw the antenna receptacle to the chassis in the or-
der shown in the drawing so that the antenna receptacle
comes to the center of the case hole.
a
Tighten this screw second
然后再拧紧此螺丝。
Tighten this screw first.
首先拧紧此螺丝。
8. 安装机壳机架
1. 确认机架四周的防水垫是否确实进入机壳的槽里。 a
2. 把机架上部插到机壳里。 b
3. 按压机架 c ，使机架和机壳成为一个整体。
注∶把机架安装到机壳上后，如果 SP/MIC 不在正确的位
置的话，请用手指调整到正确的位置。
b
9. 把天线座安装到机架
为了能把天线座安装到机芯孔的中心，在将天线座安装到
机架时，请按照图示的顺序固定螺丝。
TK-2317
19