Kenwood NX-900 Service Manual page 54

NX-900
Transmitter Section
Item
Panel tuning mode
1. High 1) Adj item: [HILMT]
Transmit Adjust: [✳✳✳✳]
Power 2) Adj item:
Limit [AwL HILMT]→
[AwH HILMT]→
[AwL HILMT] (TA)→
[AwH HILMT] (TA)
Adjust: [✳✳✳✳]
PTT: ON
Press [ ] key to store
the adjustment value.
2. Low 1) Adj item: [LOLMT]
Transmit Adjust: [✳✳✳✳]
Power 2) Adj item:
Limit [AwL LOLMT]→
[AwH LOLMT]→
[AwL LOLMT] (TA)→
[AwH LOLMT] (TA)
Adjust: [✳✳✳✳]
PTT: ON
Press [ ] key to store
the adjustment value.
54
ADJUSTMENT
Condition
PC test mode
equipment
1) Adj item: [High Power
Transmit Power Limit] meter
2) Adj item: [Low], Ammeter
[High], [Low (TA)],
[High (TA)]
PTT: Press
[Transmit] button.
Press [Apply All]
button to store the
adjustment value.
1) Adj item: [Low Trans-
mit Power Limit]
2) Adj item: [Low],
[High], [Low (TA)],
[High (TA)]
PTT: Press
[Transmit] button.
Press [Apply All]
button to store the
adjustment value.
Measurement
Test-
Unit Terminal Unit
ANT
Adjustment
Specifi cations /
Parts Method
[Panel 17.5W ±0.5W
tuning
mode] [PC test mode]
[ ],[ ] Press [Apply All]
button to store the
[PC test adjustment value
mode] after all adjustment
[ ],[ ] point was adjusted.
CAUTION!
Do not attempt to
adjust the transceiv-
er's transmit output
power beyond its
specifi cations.
If the transceiver
is adjusted beyond
the specifi cations, it
may cause deterio-
ration of the parts
reliability and the
output power may
be lowered sud-
denly and unstable.
The transceiver may
be also extremely
hot.
7.5W ±0.5W
[PC test mode]
Press [Apply All]
button to store the
adjustment value
after all adjustment
point was adjusted.
CAUTION!
Do not attempt to
adjust the transceiv-
er's transmit output
power beyond its
specifi cations.
If the transceiver
is adjusted beyond
the specifi cations, it
may cause deterio-
ration of the parts
reliability and the
output power may
be lowered sud-
denly and unstable.
The transceiver may
be also extremely
hot.
Remarks