Kyocera FS-C5010DN Operation Manual page 31

Indicators
Indicator
Ready
Data
Attention
Toner
OPERATION GUIDE
There are four types of indicators located on the top right of the printer. The
indicators are used to identify the status of the printer at any time. To
identify the printer status, check the indicators on the printer and then refer
to the table below.
Status
Lit
Fast Flashing
(Green)
Slow Flashing Offline status. You cannot print, but the printer can receive
Off
Lit
Flashing
Off
(Green)
Lit
(Orange)
Fast Flashing
Slow Flashing The cassette is not inserted properly or the paper has run
Off
Lit
Slow Flashing The toner is running low.
(Orange)
NOTE:
When the Attention indicator lights up and the Ready indicator is
flashing, memory overflow, print overrun, or KPDL error may occur. Press
GO to clear such errors.
For other combinations of the four indicators, call for service.
KM-NET for Clients (software included in the CD-ROM) and COMMAND
CENTER will provide more detailed information about the printer status.
Indicates online status (printing is possible).
An error has occurred, but printing resumes when the
key is pressed
data.
The printer is in sleep mode.
Printing has stopped because an error has occurred.
The printer is processing data.
The printer is receiving data.
The printer is not processing data.
The front cover or the paper transfer unit is open.
The rear cover is open while you specified duplex printing.
The waste toner box is not installed, or the waste toner
box is full.
While an optional feeder is installed and the feeder is
selected as a paper source, the paper cassette of the main
unit (CASS1) is not installed correctly.
A paper jam has occurred.
out.
The printer status is normal.
The printer has stopped because the toner is exhausted.
Machine Parts
Meaning
1-5