Running The Diagnostics; Eeprom Test; Testing The Card; Figure C-4. On-Board Diagnostics Display - SMC Networks EZ Card 10 User Manual

C
ONFIGURATION AND

Running the Diagnostics

To test the card's components and installation, the SETUP pro-
gram runs three different tests on the card and corresponding
cabling system as listed below:

• EEPROM Test

• Diagnostics on Board
• Diagnostics on Network
Note: Run the diagnostics before the network driver is loaded
into the system. Otherwise, your system may hang.
EEPROM Test
Read tests are performed on each register in the EEPROM.

Testing the Card

This test monitors the card and corresponding cabling system.
However, it does not test the network's condition.

Figure C-4. On-Board Diagnostics Display

C-6
D
IAGNOSTICS