Transport Instructions - Genie GS-2668 RT Operators Manual With Maintenance Information

Second Edition · Third Printing
Observe and Obey:
Common sense and planning must be applied to
control the movement of the machine when
lifting it with a crane.
The transport vehicle must be parked on a level
surface.
The transport vehicle must be secured to
prevent rolling while the machine is being
loaded.
Be sure the vehicle capacity, loading surfaces
and chains or straps are sufficient to withstand
the machine weight. See the serial plate for the
machine weight.
The machine must be on a level surface or
secured before releasing brakes.
Securing to Truck or Trailer for
Transit
Always chock the machine wheels in preparation
for transport.
Use the tie-down points on the chassis for
anchoring down to the transport surface.
Use chains or straps of ample load capacity.
Turn the key switch to the off position and remove
the key before transporting.
Inspect the entire machine for loose or unsecured
items.
Part No. 82233

Transport Instructions

Brake Release Operation
1 Chock the wheels to prevent the machine from
2 Be sure the winch line is properly secured to the
3 Turn the brake release knob counterclockwise
4 Pump the brake release pump knob.
After the machine is loaded:
1 Chock the wheels to prevent machine from
2 Turn the brake release knob clockwise to reset
Towing the Genie GS-2668 RT or the
GS-3268 RT is not recommended. If the machine
must be towed, do not exceed 2 mph / 3.2 km/h.
Genie GS-2668 RT & Genie GS-3268 RT
rolling.
drive chassis tie points and the path is clear of
all obstructions.
to open the brake valve.
rolling.
the brakes.
Operator's Manual
25