Safelink Auto Category 1 (Float Free) - Kannad Safelink User Manual

6.2. SafeLink Auto Category 1 (Float Free)

6.2.1. Installation of container
The container should be installed outside on deck or wheelhouse, or against a bulkhead or any vertical and flat
surface and comply with the following instructions:
• horizontal or vertical position;
• clear area to allow the beacon to rise the surface, should the vessel sink;
Caution: watch rigging, antenna or shroud that could build obstacles;
• easy access to the crew for manual operation;
• strongly fix to the vessel with 4 screws according to drilling mask hereunder.
Note: dimensions are in millimeters (inches in bracket).
Reminder: The instructions plate must be fixed close to the container.
DOC09028A
25