Table of Contents
Advertisement
Troubleshooting
If you have any problems with your appliance, you should check the
troubleshooting prior to calling CDA Customer Care.
If the appliance is not working, check:
•
That there is power to the appliance.
•
The house fuses are intact and the fuse in the plug has not blown.
•
The fridge has not been turned off (page 10).
•
The plug socket is functioning fine. To check this, plug another
electrical appliance in to see if the socket is faulty.
If the appliance is working, but not very well, check:
•
The appliance is not overloaded.
•
The thermostat is set to an appropriate temperature.
•
The doors are closing properly.
•
The cooling system at the rear of the appliance is clean and free of
dust, and not touching the rear wall.
•
There is enough ventilation at the side and rear walls.
If the appliance is noisy, check:
•
The appliance is level and stable.
•
The side and rear walls are clear, and there is nothing resting on the
appliance.
•
Note: The cooling gas in the refrigerator may make a slight bubbling
or gurgling noise, even when the compressor is not running.
If the appliance is beeping, check:
•
That the doors are closed. An alarm will sound after 60 seconds of
a door being open.
13
Hide quick links:
Advertisement
Table of Contents
