Table of Contents
Advertisement
Troubleshooting
If you have any problems with your appliance, you should check
the troubleshooting prior to calling CDA Customer Care, to prevent
unnecessary service calls and potential cost.
If the appliance is not working, check the following;
•
There is power to the appliance.
•
The control panel is lit and is not locked.
•
The house fuses are intact and the fuse in the plug has not blown.
•
The appliance is not in holiday mode.
•
The plug socket is functioning correctly. To check this, plug another
electrical appliance in to see if the socket is working.
If the appliance is working, but not very well, check the following;
•
The appliance is not overloaded.
•
The temperature is set to an appropriate level.
•
The doors are closing properly.
•
The cooling system at the rear of the appliance is clean and free of
dust, and not touching the rear wall.
•
There is enough ventilation at the side and rear walls.
If the appliance is noisy, check the following;
•
The appliance is level and stable.
•
The side and rear walls are clear, and there is nothing resting on the
appliance.
•
The cooling gas in the refrigerator will make a slight bubbling noise,
even when the compressor is not running.
•
It is normal to hear the compressor running. This will operate
periodically and more so when the appliance doors are opened.
15
Advertisement
Table of Contents
