Advertisement
Underarm (Axillary) use:
1. Wipe underarm with a dry towel.
2. Place probe tip in armpit and bring arm down against the body. The
thermometer should be pointing upward in the same direction as your
Figure 3
body if possible (Figure 3).
3. The time required for an accurate underarm temperature may be 12 seconds or longer
depending on placement of the probe and closure of the arm against the body.
Operation of the °F - °C feature (How to change the measuring
scale) While thermometer is OFF, press and hold the ON/OFF button
until the display appears with flashing scale (F°/C°) (as shown).
Press it again to switch between °F or °C. Power off automatically
after switch completed.
Changing the battery:
When "
" appears in the lower right of the display, the battery is
exhausted. Turn battery cover to unlock position and remove. Re-
move the old battery. Be aware of any local regulations concerning
disposal of batteries. Place a CR2032 lithium battery inside with the
positive side facing up. Replace the battery cover on the thermometer
and turn to lock
position.
Memory Function: The thermometer memory function stores 1 measurement. The last
measurement will appear with green backlight (temperature lower than 99.5° F / 37.5° C) or
red backlight (temperature higher than 99.5° F / 37.5° C) for 1 second.
Parts and Assembly
Flexible Tip
ON/OFF Button
(Do not bend beyond a 45° angle)
LCD Display
with auto shut-off
Probe
Tip
Standards:
Complies with EN 12470-3:2000, ASTM E 1112-00, ICE 60601-1-11, IEC 606061-1,
and IEC 60601-1-2
4
Advertisement
