Setting Up Your Appliance - Smeg FR150A Installation And Use Manual

Smeg refrigerator installation and use
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 9

Setting up Your Appliance

ATTENTION
After transport stand the appliance upright and wait
at least 3 hours before plugging the appliance into the
mains to ensure proper performance.
Use these average temperature settings to ensure opti-
mum performance and to save energy.
Storage - getting the most out of your appliance.
What Not to Store in the Refrigerator
Garlic (transmits odour), onions and leeks.
Bananas (they will turn black).
Citrus fruits.
Potatoes and root vegetables (store in dark, dry places).
Before storing food in your refrigerator wipe the interior with
a solution of warm water and bicarbonate of soda.
After having plugged the appliance into the socket, make
sure that the refrigerator light has turned on. Then turn the
thermostat knob "A" to setting "3". After a couple of hours,
you can place fresh food into the refrigerator.
Fill the ice trays and place them in the compartment "J".
- Air in the refrigerator circulates naturally so that colder,
heavier air tends to descend towards the bottom. This is why
meat and fish should be stored just above the crisper.
- Remember to follow our instructions on the storage life of
foods: If not stored correctly, even the freshest food will
deteriorate quite quickly.
- Contrary to popular belief, cooked foods do not keep longer
than fresh food.
- Do not store liquids in unsealed containers since this will
increase the humidity and lead to the formation of frost in
the refrigerator.
9
GB

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents