Table of Contents
Advertisement
PROBLEM
Condensation forming on the gasket
of the freezer compartment door
(FAB28) or on the wall of the freezer
compartment next to the door
IF THE PROBLEMS WITH THE PRODUCT YOU HAVE PURCHASED ARE NOT AMONGST THOSE
DESCRIBED ABOVE AND IF YOU NEED MORE INFORMATION, PLEASE CONTACT THE AUTHORISED
AFTER-SALES SERVICE. YOU WILL FIND THE ADDRESS AND TELEPHONE IN YOUR LOCAL TELEPHONE
DIRECTOR UNDER SMEG.
TO SPEED UP THE SERVICE, PLEASE BE READY TO INFORM OUR CALL SERVICE OPERATORS OF THE
MODEL OF THE PRODUCT YOU HAVE PURCHASED AND THE SERIAL NUMBER MARKED ON THE
NAMEPLATE INSIDE THE BODY OF THE REFRIGERATOR. THANK YOU IN ADVANCE FOR YOUR
ASSISTANCE.
30
Instructions for the user
POSSIBLE CAUSE
-
The gasket is not providing an
airtight
compartment.
AFTER-SALES SERVICE – READING THE NAMEPLATE.
seal
on
the
freezer
PROBABLE SOLUTION
-
Adjust the hinge if necessary:
undo the two screws and raise or
lower
the
hinge
required. Then tighten the screws
to
fix
it
in
place.
condensation is on the top, raise
the hinge; if it is on the bottom,
lower it.
-
open the door less often and for
shorter times, especially in warm,
humid weather conditions;
slightly
as
If
the
Advertisement
Table of Contents
