Zte T6 User Manual page 47

ZTE T6 User Manual
Problem
your phone on.
(U)SIM card error
Unable to connect to
the network.
You cannot answer
incoming calls.
You cannot make
outgoing calls.
PIN Code is
blocked.
Unable to enter
information into the
phone book.
Possible causes
• (U)SIM card malfunction or damage.
• (U)SIM card inserted improperly.
• Debris on the (U)SIM card contacts.
• (U)SIM card invalid.
• You are not within the network's service
area.
• Poor signal.
You have activated the Call Barring feature.
• You have activated the Call Barring
feature.
• You have activated the Fixed Dial Number
feature.
You have entered an incorrect PIN code
three consecutive times.
The phone book's memory is already full.
Confidential and Proprietary Information of ZTE CORPORATION 47
Possible solution
Take the (U)SIM card to your service
provider for testing.
Insert the (U)SIM card properly.
Use a soft, dry cloth to clean the (U)SIM card
contacts.
Contact your service provider.
Check the service area with your service
provider.
Move to an open space, or if you are inside a
building, move closer to a window.
Go to Settings > Call > All incoming, and
then select Cancel all call barring.
Go to Settings > Call > All Outgoing , and
then select Cancel all call barring.
Go to Settings > Security > FDN and
select Off to turn this feature off.
Contact your service provider. If the service
provider provides the (U)SIM card's PUK
code, use the PUK code to unlock the
(U)SIM card.
Delete unnecessary data from the Contacts.