Table of Contents
Advertisement
ZTE T6 User Manual
Charge the battery
Your phone is powered by a rechargeable battery. The battery is not fully charged when first unpacked,
but there may be enough power to power your phone on. You should use it up completely before charging
the battery for the first time. Charge the battery with the procedure indicated below.
Caution:
Charging is only possible within a temperature range of 0℃ to 45℃.
Notes:
For maximum battery performance, it is recommended that you completely charge the battery
before using the phone for the first time. A new battery's full performance is achieved only after
three complete charge and discharge cycles.
1. Push down the USB cover.
2. Insert the charger's USB adapter into the USB port.
3. Connect the charger to a standard AC wall outlet.
4. Remove the charger from both the wall outlet and the phone once the charging completed.
5. Get the rubber cover of the USB charging port back to your phone.
Notes:
•
Make sure that the adapter is inserted into the correct position. Do not force the connector into the
port.
•
The battery will be fully charged for 3~4 hours.
•
Charging is only possible within a temperature range of 0℃ to 45℃. Use the charger provided by
the original provider. Using unauthorized charger may cause danger and violate the authorization
and warranty rules of the phone.
If the phone is over-used in shortage of battery or not used for a long time, the screen may not
•
display the charge indicator until it is continues charged for 10 to 40 minutes.
(U)SIM card
You can obtain a (U)SIM card from a mobile phone service provider when you sign on as a subscriber.
Install the (U)SIM card
Notes:
The charger and other accessories should be disconnected from your phone before you insert or
•
remove the (U)SIM card.
Confidential and Proprietary Information of ZTE CORPORATION 17
Advertisement
Table of Contents
